2026 Range Rover LWB Full-Body XPEL STEALTH PPF + XR Plus Window Tint
This 2026 Range Rover LWB P400 SE pairs satin Eiger Grey XPEL STEALTH with selected XPEL ULTIMATE PLUS protection and XPEL PRIME XR Plus window tint. Factory gloss-black details retain the two-tone contrast.
Project at a Glance
- Vehicle
- 2026 Range Rover LWB P400 SE
- Original Paint
- Eiger Grey
- Mileage at Installation
- Approximately 99 miles
- Main PPF
- XPEL STEALTH
- Window Tint
- XPEL PRIME XR Plus
- Installation Time
- 3–5 business days
- Project Completed
- September 2026
- Location
- Toyz Detail Studio — Irvine, Orange County, California
The Finished Look
Owner's Goal & Pricing
Change the finish. Keep the contrast.
The owner wanted the factory Eiger Grey gloss paint visually changed to satin while keeping the factory gloss-black accents glossy. At approximately 99 miles, the Range Rover was protected early in ownership.
The front windows were intended to more closely match the darker factory rear privacy glass. A subtle darker windshield appearance was also selected for additional privacy.
Project Pricing
- Full-body XPEL STEALTH PPF
- Approximately$5,999
- XPEL PRIME XR Plus tint
When bundled with this PPF project - Approximately$600
- Combined project reference
- Approximately$6,599
Pricing Reference: September 2026. Pricing shown is a reference based on this specific September 2026 project. Final pricing may vary based on vehicle configuration, condition, coverage, film selection, removal requirements, trim treatment, surface correction needs and installation complexity.
Satin finish. Gloss contrast.
What the PPF Price Included
Preparation & installation
- Pre-install wash and clay treatment
- Professional surface preparation
- Light polishing or paint correction as needed
- Full-body XPEL STEALTH installation
Delivery & follow-up
- Post-install delivery wash
- Complimentary 1–2 week follow-up inspection
- Complimentary wash at the follow-up visit
Ceramic coating was not included in this project. It can be added separately if desired.
Satin body. Selected gloss protection.
Two-Tone Finish Strategy
Full-body PPF means all exterior painted body panels. Door jambs and hidden interior painted surfaces were not included. This Range Rover has no body-color painted roof area.
Protected with PPF
- All exterior Eiger Grey painted body panels and body-color door handles — XPEL STEALTH
- Gloss-black mirror sections, A-pillars, B-pillars and headlights — XPEL ULTIMATE PLUS
Kept without additional PPF
- Other factory gloss-black exterior trim — original gloss finish, no additional PPF
- Gloss-black roof and panoramic glass roof — no PPF
- Taillights — no PPF
- Door jambs and hidden painted areas — not covered
The finished result is a satin Eiger Grey body with contrasting factory gloss-black details. XPEL's official STEALTH information explains the satin-finish film used on the painted body.
The details behind the finish.
Bulk Hood & Front Bumper
- Hood
- Bulk installation
- Front bumper
- Bulk installation
- Emblems
- Removed before installation and reinstalled afterward using model-specific automotive-grade double-sided adhesive for a factory-like appearance.
- Bumper openings
- Film was trimmed closely around parking sensors and related openings to minimize visible gaps while preserving correct fit and function.
Wrapped Edges & Minimal Disassembly
- Edges
- All safely accessible edges were wrapped wherever practical to minimize visible film lines.
- Disassembly
- No exterior trim or body components were removed other than the emblems. Parking sensors, washer nozzles and the tow-hook cover were not removed.
The approach minimized visible film lines for a clean, factory-like finish. There were no unusual or especially difficult installation issues on this vehicle.
Three front glass surfaces.
No additional film
The 20% front-side windows were selected to more closely match the factory rear privacy glass; the 55% windshield adds the owner's chosen darker appearance and privacy.
Reference price: approximately $600 when bundled with this PPF project. Learn about the film through XPEL's official PRIME XR Plus information.
California Tint Disclosure
The 20% front-side-window tint and 55% full-windshield tint shown on this vehicle do not comply with California's standard restrictions for on-road window tinting. These shades were specifically selected by the vehicle owner after being informed of the applicable restrictions. The vehicle owner is responsible for legal compliance, citations, and any required removal or modification of the film. Toyz Detail Studio does not represent these shade selections as California-legal.
More Project Photos
After installation.
XPEL STEALTH
10-year XPEL manufacturer warranty. See XPEL's official warranty information for applicable terms.
XPEL PRIME XR Plus
Applicable transferable lifetime XPEL manufacturer warranty when installed through Toyz Detail Studio as an authorized dealer. Manufacturer warranty terms apply.
Toyz Detail Studio workmanship
We stand behind our installation work. If an issue is caused by our workmanship, Toyz Detail Studio will take responsibility and correct it.
PPF aftercare
- Avoid washing immediately after installation.
- Once settled, hand washing or touchless washing is recommended.
- Avoid automatic brush car washes.
Tint aftercare
Do not roll down the newly tinted front side windows for approximately 48 hours.
Project Questions
Can XPEL STEALTH turn a gloss Range Rover into a satin finish?
Yes. On this project, XPEL STEALTH changed the appearance of the factory Eiger Grey gloss-painted body panels to a satin finish. The factory gloss-black accents stayed glossy, creating a satin Eiger Grey body with contrasting factory gloss-black details.
Which parts of this Range Rover were protected with XPEL STEALTH?
All exterior Eiger Grey painted body panels and the body-color door handles received XPEL STEALTH. Full-body coverage here means exterior painted body panels. Door jambs and hidden painted areas were not included. This vehicle has no body-color painted roof area; neither the gloss-black roof nor the panoramic glass roof received PPF.
Which gloss-black areas were protected with XPEL ULTIMATE PLUS?
XPEL ULTIMATE PLUS was installed on the gloss-black mirror sections, A-pillars and B-pillars, as well as the headlights. Other factory gloss-black exterior trim stayed in its original gloss finish without additional PPF. The gloss-black roof and taillights were not protected with PPF.
How much did this Range Rover full-body XPEL STEALTH project cost?
The September 2026 reference was approximately $5,999 for the PPF work and approximately $600 for XPEL PRIME XR Plus tint when bundled with this PPF project, for a combined reference of approximately $6,599. This is a project-specific reference; final pricing can vary with the vehicle, preparation and selected coverage. Ceramic coating was not included.
How long does full-body XPEL STEALTH installation take on a Range Rover LWB?
The installation-time reference for this 2026 Range Rover LWB P400 SE is 3–5 business days. Vehicle condition, selected coverage and installation requirements can affect scheduling.
Were the hood and front bumper installed using bulk film or pre-cut patterns?
Both the hood and front bumper were bulk installations. Safely accessible edges were wrapped wherever practical. Only the emblems were removed; parking sensors, washer nozzles and the tow-hook cover stayed in place. Film was trimmed closely around the bumper openings to minimize visible gaps while preserving fit and function.
What window tint was installed, and are 20% front-side windows and a 55% windshield legal in California?
XPEL PRIME XR Plus was installed on the two front side windows at 20% and on the windshield at 55%. The factory rear side and rear privacy glass remained unchanged without additional film. These front-side-window and full-windshield shades do not comply with California's standard on-road tint restrictions. They were selected by the owner after being informed of the applicable restrictions; Toyz Detail Studio does not represent them as California-legal.
Planning XPEL STEALTH for Your Range Rover?
Send us your Range Rover year, model or trim, and a few photos. Toyz Detail Studio can recommend the appropriate PPF coverage, finish and tint setup for your vehicle.