Toyz Detail Studio / Irvine, Orange County

Black Mercedes-AMG GLE 63 SFull-Body STEK DYNOmatte PPF, XR Plus Tint & Fusion Ceramic

This black Mercedes-AMG GLE 63 S received full-body STEK DYNOmatte PPF, XPEL XR Plus tint and XPEL Fusion ceramic coating at Toyz Detail Studio in Irvine.

Full-Body STEK DYNOmatte PPF, XPEL XR Plus Tint & XPEL Fusion Ceramic Coating

The Project

Project at a Glance

Vehicle: Black Mercedes-AMG GLE 63 S
PPF: STEK DYNOmatte
Coverage: Full Body
Tint: XPEL XR Plus
Ceramic: XPEL Fusion
Coated Surfaces: Glass · PPF · Wheels & Calipers
Location: Irvine, Orange County, California

The Finished Look

DYNOmatte on the Black GLE 63 S

Full opposite front three-quarter view of the black GLE 63 S outside the buildings.

Full opposite rear three-quarter view of the matte-black GLE 63 S near the curb.

Project Focus

The GLE 63 S's black body takes on a softer matte/satin sheen with full-body STEK DYNOmatte PPF. Warm light follows the curved rear quarter, while front and side views show the contrast between the low-gloss body and darker grille, glass and wheels.

XPEL XR Plus tint and XPEL Fusion ceramic coating complete the recorded service combination. Fusion's project-specific surface list is glass, PPF, wheels and calipers; the wheel and red-caliper detail gives that part of the vehicle a closer visual context.

A Closer Look

The GLE 63 S Matte PPF Finish

The complete side profile shows the black matte body, dark glass and wheels with red calipers.

Full-Body Matte PPF

STEK DYNOmatte Paint Protection Film

Full-body STEK DYNOmatte PPF is documented for this GLE 63 S. DYNOmatte is a matte/satin paint protection film, adding a physical film layer while changing the visible sheen of the black body.

Toyz's historical PPF standard includes headlights and excludes taillights by default. Extended patterns are used for precut work, and accessible edges are wrapped where practical. The source does not identify cutting methods for individual panels.

Close-up of the Mercedes-Benz hood emblem on the GLE 63 S matte-black hood — Soft highlights on the matte hood beside the Mercedes emblem.

The Glass Service

XPEL XR Plus Window Tint

XPEL XR Plus window tint is the named tint service for this GLE 63 S. It is recorded alongside the full-body DYNOmatte installation and Fusion ceramic coating.

Keep newly tinted movable windows raised on installation day. Normal operation may resume the following day, following Toyz's tint aftercare standard.

GLE 63 S rear side glass, door handle and matte rear-quarter bodywork — Rear side glass, door and the matte-black body in a close exterior view.

The Recorded Coating Surfaces

XPEL Fusion: Glass, PPF, Wheels & Calipers

The ceramic coating named in this project is XPEL Fusion. The documented surfaces are glass, PPF, wheels and calipers.

Ceramic coating provides surface protection and supports easier maintenance. It does not replace the physical PPF layer or provide equivalent stone-chip impact protection.

Close-up of the GLE 63 S black wheel, Mercedes center cap, brake disc and red caliper — The black wheel and red caliper in detail; both are included in the recorded coating scope.

The Complete Project

More Project Photos

Explore the black GLE 63 S exterior and preserved vehicle details. All 34 original project photographs remain accessible in the full viewer.

Elevated front detail of the GLE 63 S matte hood, Mercedes emblem and vertical grille.

Mercedes-AMG GLE 63 S digital instrument display viewed behind the steering wheel.

GLE 63 S interior door controls, speaker grille and patterned trim above an ambient-light strip.

Low rear-corner view of the GLE 63 S matte body, rear lamp and hatch emblem.

Care & Workmanship

Aftercare & Workmanship

Tint Aftercare

Do not roll newly tinted movable windows down on installation day. Normal operation may resume the following day.

Film & Coating Care

Ask Toyz for maintenance guidance suitable for the matte/satin PPF and the coated glass, wheels and calipers. Use care methods compatible with each installed surface treatment.

Toyz Workmanship

We stand behind our installation work. If an issue is caused by our workmanship, Toyz Detail Studio will take responsibility and correct it.

Project Questions

Is the matte finish on this GLE 63 S vinyl or PPF?

The documented material is STEK DYNOmatte paint protection film. This is a matte/satin PPF project with verified full-body coverage.

Was XPEL XR Plus tint part of this GLE 63 S project?

Yes. XPEL XR Plus window tint is specifically documented alongside the full-body DYNOmatte PPF. The project record does not list tint percentages.

Which surfaces received XPEL Fusion ceramic coating?

The recorded Fusion coating scope is glass, PPF, wheels and calipers. The calipers are explicitly included in this project's surface list.

Does Fusion ceramic coating replace the DYNOmatte PPF layer?

No. Ceramic coating is surface protection that supports maintenance. It does not replace a physical PPF layer or offer equivalent stone-chip impact protection.

What is Toyz's historical approach to lights and PPF edges?

Toyz's PPF standard includes headlights and excludes taillights by default. Precut work uses extended patterns, and accessible edges are wrapped where practical. These standards do not establish individual panel cutting methods for this GLE 63 S.

When can the newly tinted movable windows be rolled down?

Do not roll newly tinted movable windows down on installation day. Normal operation may resume the following day, following Toyz's tint aftercare standard.

BE PROUD OF WHAT YOU DRIVE

Planning Matte PPF for Your GLE 63 S?

Tell Toyz about your AMG and the finish and protection scope you have in mind. We can discuss matte PPF, tint and coating surfaces for your GLE 63 S.

Get a GLE 63 S Protection Quote Text Us About GLE 63 S Protection