Complete side profile of the 2026 Bugatti W16 Mistral in Atlantic Blue and Blue Carbon, with silver wheels and its open cockpit
Irvine, California · Collector-Car Protection

2026 Bugatti W16 MistralSTEK DYNOshield PPF + XPEL Ceramic + Under Armor

A collector’s Atlantic Blue and Blue Carbon Mistral, specified to continue his own Veyron’s visual language. Toyz protected the painted and exposed-carbon exterior with clear STEK DYNOshield, then added XPEL ceramic and front-splitter underside protection.

STEK DYNOshieldXPEL FUSION PLUSToyz Under Armor

Project at a Glance

Vehicle
2026 Bugatti W16 Mistral
Mileage
23 miles at service
Project Date
June 2026
Turnaround
10 days
Exterior
Atlantic Blue + Blue Carbon
PPF
STEK DYNOshield · clear/gloss
Coverage
Full exterior paint + exposed carbon
Ceramic
XPEL FUSION PLUS · PPF, windshield + wheel faces
Specialty
Toyz Under Armor · front splitter underside
Location
Irvine / Orange County, California

The Finished Look

Owner’s Goal

From Veyron to Mistral

This collector specified his new W16 Mistral to continue the visual language of his own Bugatti Veyron. The same overall color scheme carries into Atlantic Blue and Blue Carbon, while the wheel design references the Veyron’s style.

With only 23 miles at service, the aim was to protect that personal specification. Clear protection retains the blue paint, visible carbon weave and chosen design details.

Bugatti built 99 W16 Mistral examples to close the roadgoing W16 era. This project’s collector story is the continuity between his two Bugattis.

Comparable Scope

Current Reference Pricing

Full-body STEK DYNOshield
Approximately$15,999
XPEL ceramic coating package
Approximately$599
Toyz in-house Under Armor
Approximately$399

Pricing shown is for reference only. Final pricing varies by vehicle, condition, exact coverage, product selection, installation complexity and requested scope. Contact Toyz Detail Studio for a vehicle-specific quote.

STEK DYNOshield: Paint + Blue Carbon

Preserve the Specification

STEK DYNOshield is the clear/gloss paint protection film used on this Mistral. Its physical, sacrificial layer protects the visible exterior while keeping the underlying finish in view.

  • All Atlantic Blue exterior painted surfaces.
  • All exposed Blue Carbon exterior surfaces.
  • A clear/gloss finish that preserves the existing paint-and-carbon contrast.

Full exterior coverage refers to the visible painted and exposed-carbon surfaces. Door jambs and hidden areas are not part of the documented scope.

STEK DYNOshield product information · Toyz PPF coverage options

Blue Carbon Remains Visible

The exposed weave is part of the collector’s specification, rather than a surface to conceal. Transparent film preserves its visual relationship with the Atlantic Blue paint.

XPEL Ceramic for PPF, Glass & Wheels

The standard Toyz XPEL ceramic system complements the film with hydrophobic behavior and easier cleaning. Ceramic coating provides a surface treatment; the PPF remains the physical protection layer.

PPF Surfaces

XPEL FUSION PLUS Paint & PPF

Applied over the protected exterior to support water repellency and easier maintenance.

Windshield

XPEL FUSION PLUS Glass

The glass treatment was limited to the windshield.

Wheel Faces

XPEL FUSION PLUS Wheel & Caliper

The wheel treatment was limited to the visible wheel faces.

The documented ceramic scope does not include other glass, wheel barrels, brake calipers or the interior. The Wheel & Caliper product name does not expand the installed scope.

XPEL FUSION PLUS product information

Under Armor at the Front Splitter Underside

A Sacrificial Layer at the Low Front Edge

Toyz added its in-house Under Armor anti-scrape solution to the front lower lip / splitter underside. This is the low front area exposed to driveway and road-transition scrape risk.

The protected area is the splitter underside only. This project does not document full-underbody or chassis protection.

The finished photograph shows the low front edge and its clearance context. The installed underside protection is outside this view.

The Collector’s Interior Specification

The Hermès-customized interior is part of the Mistral’s vehicle specification. The cockpit and the Hermès Paris signature beside the gear selector add context to the collector’s personalization; Toyz did not perform an interior service on this project.

Warranty & Aftercare

Manufacturer Terms

Paint & PPF
XPEL publishes a 4-year limited product warranty for FUSION PLUS Paint & PPF.
Glass
XPEL publishes a 2-year limited product warranty for FUSION PLUS Glass.
Wheel & Caliper
XPEL publishes a 3-year limited product warranty for FUSION PLUS Wheel & Caliper.

These are published product terms, subject to manufacturer conditions and applicable installation records, including required annual inspections by an XPEL certified installer. The Paint & PPF terms name XPEL film; eligibility over this project’s STEK film has not been confirmed.

No fixed STEK warranty duration is stated for this DYNOshield + XPEL combination because its manufacturer eligibility has not been confirmed. Contact Toyz to verify applicable coverage.

Read XPEL’s official limited-warranty terms

Care & Installation Support

Use gentle washing methods and products compatible with the installed film and coatings. Avoid directing high-pressure water closely at film edges.

Follow the installation-specific care instructions supplied at delivery. Contact Toyz for an inspection if you notice a concern with the film, coating or underside protection.

We stand behind our installation work. If an issue is caused by our workmanship, Toyz Detail Studio will take responsibility and correct it.

W16 Mistral Project Questions

What PPF was installed on this W16 Mistral?

STEK DYNOshield clear/gloss PPF was installed across the full visible exterior, including both Atlantic Blue painted surfaces and exposed Blue Carbon.

Did Toyz protect only the painted body?

No. The documented protection scope includes all exterior painted surfaces and all exposed Blue Carbon exterior surfaces. It does not represent door-jamb or hidden-area coverage.

Why use clear PPF on this collector-spec Mistral?

The goal was to preserve the existing specification. Clear/gloss film keeps the Atlantic Blue paint and Blue Carbon visible while adding a sacrificial physical layer.

How does this Mistral connect to the owner’s Veyron?

The collector intentionally specified the same overall color scheme and a wheel design that references his own Veyron. The design continues that car’s visual language; the physical Veyron wheels were not transferred to the Mistral.

Was the Hermès interior a Toyz service?

No. The Hermès-customized interior is part of the vehicle’s personal specification. Toyz’s documented work on this project was exterior protection.

Where was XPEL ceramic coating applied?

FUSION PLUS Paint & PPF was applied to the PPF surfaces, FUSION PLUS Glass to the windshield only, and FUSION PLUS Wheel & Caliper to the wheel faces only. This scope excludes other glass, wheel barrels, brake calipers and the interior.

What is Toyz Under Armor on this project?

It is Toyz’s in-house anti-scrape protection solution, installed on the front lower lip / splitter underside as an additional sacrificial layer at that low front edge.

Does Under Armor cover the entire underbody?

No. The documented Under Armor scope on this Mistral is the front lower lip / splitter underside only.

What is current reference pricing for a comparable project?

Approximately $15,999 for full-body STEK DYNOshield, $599 for the XPEL ceramic package, and $399 for Toyz Under Armor. These are reference prices only; final pricing varies by vehicle, condition, exact coverage, product selection, installation complexity and requested scope. Contact Toyz for a vehicle-specific quote.

BE PROUD OF WHAT YOU DRIVE

Protecting a Collector Car Without Changing Its Specification?

Discuss your vehicle, its finish and the surfaces you want to protect. Toyz can help define full-body PPF, ceramic and low-front protection for your project.