2026 Porsche 911 Turbo S XPEL PPF, XR Plus Tint & Ceramic Coating
This Jet Black Metallic 2026 Turbo S arrived with quality dealer-installed XPEL front PPF. Toyz retained it, completed the remaining exterior with ULTIMATE PLUS Gloss, and added XR Plus tint and FUSION PLUS ceramic protection.
Project at a Glance
- Vehicle
- 2026 Porsche 911 Turbo S Coupe
- Generation
- 992.2 / 992 II
- Factory Color
- Jet Black Metallic
- Mileage
- Less than 1,000 miles
- Project Date
- July 2026
- Turnaround
- 4–6 business days
- Location
- Irvine, Orange County
- PPF
- XPEL ULTIMATE PLUS Gloss
- Toyz PPF Scope
- Rear Half / remaining-body completion
- Tint
- XPEL PRIME XR Plus
- Ceramic
- XPEL FUSION PLUS system
The Finished Turbo S
Project Focus & Pricing
Inspect. Retain. Complete.
The nearly new Turbo S arrived with a dealer-installed XPEL ULTIMATE PLUS Track Package. The front film was installed well, so Toyz retained it and made minor edge and corner corrections instead of replacing good protection.
The existing package also included rocker and lower-door protection and partial rear-quarter film. Toyz removed the partial quarter film, reworked the rocker and lower-door areas, and completed the remaining exterior in ULTIMATE PLUS Gloss.
The finished coverage combines retained dealer front PPF with Toyz’s new remaining-body installation across all exterior painted body panels, gloss-black pieces and carbon-fiber pieces.
Current Reference Pricing
- Rear Half / Remaining Body
XPEL ULTIMATE PLUS PPF - $4,799
- Window Tint Package
XPEL PRIME XR Plus - $999
- Ceramic Coating Package
XPEL FUSION PLUS - $599
Reference pricing for a comparable scope; final pricing can vary with vehicle condition and requested coverage. These are current references, not the historical invoice amounts.
Complete Exterior Painted-Panel Protection
XPEL ULTIMATE PLUS Gloss
Completing the Rear Half
“Rear Half” describes Toyz’s remaining-body completion around the retained dealer front coverage. ULTIMATE PLUS Gloss was installed on the remaining exterior painted body panels, with complete rear-quarter coverage replacing the earlier partial-quarter film.
- Rocker and lower-door PPF reworked / replaced
- All remaining exterior painted body panels protected
- All exterior gloss-black and carbon-fiber pieces protected
- Carbon-fiber diffuser included
XPEL ULTIMATE PLUS product information · Toyz PPF coverage options
Exterior Coverage, With Clear Boundaries
All exterior painted body panels were protected after completion, using both retained and newly installed film. The final scope also includes all exterior gloss-black and carbon-fiber pieces.
This exterior scope does not include door jambs, hidden or interior painted areas. Taillights were not covered. The original front installation remains dealer work.
XPEL PRIME XR Plus
Four Glass Groups, Four Film Selections
- Windshield
- 55%
- Front side windows
- 35%
- Rear side glass
- 20%
- Rear / trunk glass
- 35%
XPEL PRIME XR Plus was selected for cabin heat management, glare reduction and privacy. These percentages describe film shades, rather than independently measured combined glass-and-film light transmission.
California Tint Disclosure
California restricts tint on windshields and front side windows. The shades listed here document this project’s installation and do not establish compliance with California requirements.
XPEL FUSION PLUS
PPF, Windshield & Wheel Faces
- All PPF surfaces
- XPEL FUSION PLUS Paint & PPF — retained dealer front film and Toyz-installed film
- Windshield only
- XPEL FUSION PLUS Glass
- Wheel faces only
- XPEL FUSION PLUS Wheel & Caliper
The ceramic system adds hydrophobic behavior, easier maintenance and environmental surface protection across the stated surfaces. It complements the physical film layer; ceramic does not replace PPF’s impact protection.
The Glass product was used on the windshield only. The Wheel & Caliper product was used on the wheel faces only; the wheel barrels and brake calipers were not coated.
Ceramic Across Both PPF Installations
Paint & PPF coating was applied to the retained dealer front film and Toyz’s newly installed film. The original Jet Black Metallic finish remains visible beneath the clear gloss PPF.
Ceramic supports easier care, but does not make the car maintenance-free or protect it from every scratch or stone impact.
Integrating Existing & New Protection
Retain What Was Installed Well
- Dealer front PPF
- Inspected, retained and given minor edge / corner corrections
- Rear-quarter film
- Partial coverage removed and replaced with complete rear-quarter protection
- Rocker / lower-door areas
- PPF reworked / replaced to integrate with the remaining exterior coverage
The installation decision was to preserve good front film and complete the areas that needed attention. Toyz’s remaining-body work integrated with the original package without taking credit for the dealer’s front installation.
More Project Photos
Sixteen additional exterior and cabin photographs complete the record. Open any photo to browse all 26 project images, including the hero and earlier views.
Warranty & Aftercare
- Toyz-installed ULTIMATE PLUS
- 10-year limited manufacturer warranty when applicable under current XPEL terms
- PRIME XR Plus
- XPEL limited manufacturer warranty for the life of the vehicle, subject to terms
- FUSION PLUS Paint & PPF
- 4-year manufacturer warranty — PPF surfaces
- FUSION PLUS Glass
- 2-year manufacturer warranty — windshield only
- FUSION PLUS Wheel & Caliper
- 3-year manufacturer warranty — wheel faces only
Manufacturer coverage is subject to product terms, care requirements and applicable registration. Maintain the required annual ceramic inspections with a certified XPEL installer, within 30 days before or after the installation anniversary or last inspection / service date. Current XPEL warranty terms
The original front PPF was dealer-installed; its original installation history and workmanship remain with the dealer. Toyz’s workmanship statement applies to Toyz’s work.
Toyz Installation Workmanship
We stand behind our installation work. If an issue is caused by our workmanship, Toyz Detail Studio will take responsibility and correct it. This applies to Toyz’s installation work.
PPF & Ceramic Care
Follow the delivery instructions for washing and coating cure. Use gentle, non-abrasive cleaning methods and avoid directing high-pressure water at film edges.
Keep coating care and required certified-installer inspections current. Ceramic protection supports maintenance; it does not remove the need to wash and care for the vehicle.
Window Tint Aftercare
Do not roll freshly tinted movable windows down on installation day. Normal operation may resume the following day. Follow any additional installation-specific care instructions provided at delivery.
Window-film cleaning is separate from the next-day roll-down guidance. Follow the film-cleaning instructions provided at delivery.
Project Questions
Did Toyz replace the dealer-installed front PPF?
No. This Turbo S arrived with a dealer-installed XPEL ULTIMATE PLUS Track Package. The front film was installed well, so Toyz retained it and made minor edge and corner corrections. The work then focused on integrating the existing protection with the remaining exterior coverage.
What did Rear Half mean on this Turbo S?
Rear Half described Toyz's remaining-body PPF completion around the retained dealer front package. Toyz removed the partial rear-quarter film, reworked the rocker and lower-door protection, and completed the remaining exterior with XPEL ULTIMATE PLUS Gloss.
Did the finished Turbo S have PPF on all exterior painted body panels?
Yes. The finished exterior painted-panel protection combined the retained dealer-installed front XPEL PPF with Toyz's new remaining-body coverage. Toyz did not install the original dealer front package.
Were the gloss-black and carbon-fiber pieces protected?
Yes. Toyz protected all exterior gloss-black pieces and exterior carbon-fiber pieces, including the carbon-fiber diffuser. This coverage refers to exterior surfaces.
Which XR Plus tint percentages were used?
XPEL PRIME XR Plus was installed at 55% on the windshield, 35% on the front side windows, 20% on the rear side glass and 35% on the rear/trunk glass. California restricts windshield and front-side window tint; these installed shades do not establish compliance with California requirements.
Where was the ceramic coating applied?
XPEL FUSION PLUS Paint & PPF was applied across the protected vehicle, including both the retained dealer front film and Toyz-installed PPF. FUSION PLUS Glass was applied to the windshield only, and FUSION PLUS Wheel & Caliper was applied to the wheel faces only.
Does ceramic coating replace PPF?
No. PPF provides a physical layer of protection against stone chips and abrasion. Ceramic coating adds hydrophobic behavior, easier maintenance and environmental surface protection. The two products serve different roles on this Turbo S.
What is the current reference pricing for a comparable setup?
Current reference pricing is $4,799 for rear-half / remaining-body XPEL ULTIMATE PLUS PPF, $999 for the XPEL PRIME XR Plus tint package and $599 for the ceramic coating package. These are current comparable-scope references, not the historical invoice amounts. Final pricing can vary with vehicle condition and requested coverage.
Planning Complete XPEL Protection for Your Porsche 911?
Tell us about your Porsche, any existing PPF and the coverage you want to complete. We can discuss remaining-body PPF, XR Plus tint and ceramic options.